The Yamaha has been released since September of 2015 and we have a few products we are working on to help improve the platform and each one seems to be a success so far. The most popular item is the gear reduction we do at the transmission, it gives a 30% reduction on 1st thru 5th and also reverse. In stock form its geared to do well over 80mph but electronic speed limiter does not allow those speeds to be reached. With the power delivery being so high in the RPM range, it works much better bringing down the ratios so that the power can be used more easily and make the car more driver friendly. The gear reduction also lets people run 30’s or 31’s and have the same pull and feel as stock tires.
The other gear reduction we offer is in 1st gear only, which adds an additional 35% reduction, making it 70% over all. This low range is what you get when you shift a RZR or any similar UTV with a Low Range on the shifter. Our new 1st gear turns it into a “granny gear”, allowing you to climb and navigate at slow speeds with plenty of torque and limit the wheel spin. Starting and stopping in a precarious spot is no longer a worry with this. Check out our 1st gear crawling footage here on Youtube.
Our last upgrade we are offering is the clutch drum mod that increases the oil capability of the stock clutch basket by using redirected oiling paths to cool and lube the more friction prone areas. It really gives the clutch the ability to be super heated, hot enough to billow out smoke, but keep a firm and full pedal. The footage we have of our YXZ in the rocks is using the STOCK clutch plates and discs! They can hold up to the abuse, but we also offer and recommend the Barnett clutch plates and discs. The addition of our clutch mod can work in conjunction with any aftermarket clutch system, the Rekluse clutch is a popular clutch.
We have 2-3 units equipped with all of our mods out at 2016 King of The Hammers and they are blowing the doors off of the RZR’s and putting their YXZ where no other Yamaha can even compete.
We are taking orders for the next batch of gears we are having shaped and there is a $1000 deposit needed to reserve a spot in line. Once your deposit is in we will ship you a box outfitted with dense foam packing so you can ship us your complete transmission. When we receive your transmission it takes about 4-5 days to split the cases, modify the porting, modify the clutch and install the gears. You can give us a call anytime or shoot us an email.
COMPLETE KIT – $2200 USD
KIT INCLUDES: LABOR TO SPLIT THE CASE, MODIFY THE OIL PORTING AND INSTALL THE GEARS. THIS ALSO INCLUDES THE DROP SET OF GEARS AND 1ST GEAR AND THE CLUTCH MOD.
INDIVIDUAL COMPONENTS RUN:
DROP SET OF GEARS (PAIR) – $850
1ST GEAR (PAIR) – $650
CLUTCH MOD – $250
BARNETT KEVLAR PLATES – $232
BARNETT CONVERSION PLATE – $141
REKLUSE CLITCH – $799
WE CAN ALSO INSTALL ANY AFTERMARKET CLUTCH COMPONENTS FOR AN ADDITIONAL FEE IF YOU SUPPLY THE PARTS.
GEAR KITS ARE NOT AVAILABLE FOR INDIVIDUAL PURCHASE YET. WE WILL BE RELEASING DETAILED INFORMATION ON HOW TO BECOME A TUBEWORKS GEAR INSTALLER IN THE NEAR FUTURE. PRICING FOR THE GEAR KITS IS AS FOLLOWS:
